Alternative Emulation For Kpdl Emulation - Kyocera FS FS-1920 Operation Manual

Pagination

Alternative Emulation for KPDL Emulation

5
Press the ENTER key.
6
Press the MENU key. The message display returns to Ready.
The auto KPDL (KPDL (AUTO)) emulation enables the printer to
automatically change the emulation mode according to the print job
received. The alternative emulation can be selected using the operator
panel. The default alternative emulation is PCL 6.
1
Press the MENU key.
2
Press the or
Emulation
PCL 6
3
Press the ENTER key. A blinking question mark (?) appears.
Emulation
?PCL 6
4
Press the or
KPDL (AUTO) appears.
Emulation
?KPDL (AUTO)
5
Press the ENTER key.
6
Press the > key. When > Print KPDL Errs is displayed, press the
or key. The display cycles through the emulation in the following
order:
PCL 6 (default)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
7
Press the ENTER key. A blinking question mark (?) appears.
>Alt. Emulation
?PCL 6
key repeatedly until Emulation appears.
key repeatedly until the message display indicated
1-42