Selecting The Output Stack - Kyocera FS FS-1920 Operation Manual

Selecting the Output Stack

The following procedure allows you to select whether printouts will be
received by the top tray or to the rear tray. If an option sorter is installed, it
can also be selected using the manner described below.
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the > key.
4
Press the or
>Stack Select
Top tray FaceDn
5
Press the ENTER key. A blinking question mark (?) appears.
>Stack Select
?Top tray FaceDn
6
Press the or
tray changes as shown below.
Top tray FaceDn (Printer's top tray) [Default]
RearTray FaceUp (Printer's rear tray) [Option rear tray required]
Sorter FaceDn [Option sorter required]
7
When the desired paper source displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key repeatedly until Paper Handling > appears.
key repeatedly until >Stack Select appears.
key to display the desired destination. The output
1-39
Paper Handling