Received Data Dumping - Kyocera FS FS-1920 Operation Manual

Received Data Dumping

It is possible to print data received by the printer as hexadecimal code for
the purposes of debugging programs and files.
1
Press the MENU key.
2
Press the or
Others
3
Press the > key.
4
Press the or
>Print HEX-DUMP
5
Press the ENTER key. A question mark (?) appears.
>Print HEX-DUMP?
6
Press the ENTER key again. Processing appears for a second, and
then Waiting appears.
Processing
Waiting
7
Send data to be dumped to the printer. The message Processing
will be displayed during receiving the data.
Once the dumped data you require has been output, it is possible to
cancel the printing of any further dumped data by taking the printer
offline by pressing the GO key and then pressing the CANCEL key.
8
Once all data has been received, the message Waiting will appear.
Press the GO key to finish printing.
key repeatedly until Others > appears.
>
key repeatedly until > Print HEX-DUMP appears.
1-23
Printing Test Pages