Kyocera FS FS-1920 Operation Manual page 178

Kyocera page printer operation guide fs-1920
Table of Contents

Advertisement

Expanding the Printer Memory
Removing the Main Circuit Board
The main circuit board of the printer is equipped with two sockets for
memory expansion. Expansion memory is available in the form of DIMM.
The following instructions are intended for the technician only.
Note
Notes on Handling the Main Circuit Board and DIMM
Protect the electronics by taking these precautions:
Before touching the main circuit board and DIMM, touch a water pipe
or other large metal object to discharge yourself of static electricity.
While doing the work, it is recommended that you wear an antistatic
wrist strap.
Touch the main circuit board and DIMM only at the edges.
Removing the Main Circuit Board from the Printer
Be sure to remove the CompactFlash Card (memory card) first if inserted
in the printer's card slot.
Note
Remove the main circuit board completely from the printer as follows:
1
Turn the printer off and unplug its power cord. Disconnect the
printer from the host computer.
YES
A-4
NO

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecosys fs-1920Fs-3820nFs-3830n

Table of Contents