Automatic Form Feed Timeout - Kyocera FS FS-1920 Operation Manual

Kyocera page printer operation guide fs-1920
Table of Contents

Advertisement

Automatic Form Feed Timeout

When the printer receives no data for a certain time, it time out and
releases the current interface: it prints whatever data it has in its buffer
and feeds out the page. You can adjust the time-out time as follows:
1
Press the MENU key.
2
Press the
or
Others
3
Press the > key.
4
Press the
or
The default setting is 30 seconds.
>Form Feed
Time Out 030sec.
5
Press the ENTER key. A blinking cursor (
>Form Feed Time.
Time Out 030sec.
6
Press the
or
where the cursor is blinking and set the desired time. The time can
be set between 0 and 495 seconds, in 5-second increments. You can
use the > and < keys to move the cursor right and left.
7
Display the desired time and press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key repeatedly until Others > appears.
>
key repeatedly until >Form Feed Time appears.
key to increase or decrease the value of the figure
1-99
Configuration
) appears.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecosys fs-1920Fs-3820nFs-3830n

Table of Contents