Creating Custom Paper Type; Resetting The Custom Paper Type - Kyocera FS FS-1920 Operation Manual

Kyocera page printer operation guide fs-1920
Table of Contents

Advertisement

Paper Handling

Creating Custom Paper Type

6
Press the
or
changes as shown below.
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High quality
Custom (1 to 8)
7
When the desired MP tray type is displayed, press the ENTER key.
8
Press the MENU key and the message display returns to Ready.
The following describes the procedure used to set a user-defined paper type
for the printer. Eight custom user settings may be registered. After having
been set, any of these may be called up when setting the paper type for a
paper source.
The paper weight and duplex path can be set (see
Weight
on page 1-34, and
selecting the paper type to be customized as follows. For how to reset the
customized settings, see
1
Press the MENU key.
2
Press the
or
Paper Handling >
3
Press the > key.
4
Press the
or
>Type Adjust
Custom 1
key to display the desired MP tray type. The display
Setting the Duplex Path

Resetting the Custom Paper Type

key repeatedly until Paper Handling > appears.
key repeatedly until >Type Adjust > appears.
>
1-32
Setting the Paper
on page 1-35) after
on page 1-36.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecosys fs-1920Fs-3820nFs-3830n

Table of Contents