Character Pitch - Kyocera Ecosys P3050dn Operation Manual

Character Pitch

You can set the character pitch for fixed fonts.
Font:
01 Font Type
Font ID
02
03 Courier
Pitch:
(0.44 – 99.99)
Code Set (Setting the code set)
You can change the character code set. Available character code sets vary depending on the current font.
Code Set:
* IBM PC-8
IBM PC-8(D/N)
IBM PC-850
6
1
2
Exit
3
4
10.00 cpi
5
6
1
2
3
4
Press [OK]. The font size is set and the Font menu reappears.
In the Print Settings menu, press  or  to select Font.
Press [OK]. The Font menu screen appears.
Press  or  to select Pitch.
Press [OK]. The Pitch entry screen appears.
Use the numeric keys or press  or 
Note The character pitch can be set between 0.44 and
99.99 characters per inch, in 0.01 character-per-inch
increments.
Press [OK]. The character pitch is set and the Font menu reappears.
In the Print Settings menu, press  or  to select Code Set.
Press [OK]. The Code Set screen appears listing the available
character code sets.
Press  or  to select the desired character code set.
Press [OK]. The character code set is set and the Print Settings
menu reappears.
4-52
Operation Panel
to enter the character pitch.