Ef-60 Envelope Feeder - Kyocera FS FS-1920 Operation Manual

EF-60 Envelope Feeder

Install the option envelope feeder at the front of the printer. By installing
the envelope feeder, you can print on a wide variety of different envelope
sizes. And the EF-60 feeds envelopes automatically, making it easy to print
on large quantities of envelopes at one time.
Installing the envelope feeder on the printer
Turn OFF the power to the printer before installing the envelope feeder.
Note
1
Pull the printer's paper transfer unit release lever (green colored),
then draw the paper transfer unit fully out of the printer.
2
Gently tilt the MP tray toward the printer until that it rests on its
side as shown in the figure, and remove the MP tray from the printer
by lifting it straight upward.
MP tray
Paper Transfer Unit
A-21
Installing Option Units
Paper Transfer Unit Release Lever
(green colored)