Font; Default Font - Kyocera FS FS-1920 Operation Manual

Kyocera page printer operation guide fs-1920
Table of Contents

Advertisement

Pagination

Font

Default font

8
Select On using the
>Print KPDL Errs
? On
9
Press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
You can select the default font for the current interface. In addition to the
internal fonts, all fonts that are downloaded to the printer memory, or fonts
stored on a CompactFlash card, Microdrive, or option ROM, can be selected
as the default font.
In this menu, you can also set the type and pitch for Courier and Letter
Gothic.
1
Press the MENU key.
2
Press the
or
Font
3
Press the > key.
4
Press the
or
>Font Select
Internal
5
To select an internal font, check that Internal is displayed. If
Internal is not displayed, press the ENTER key. Press the
key repeatedly until the message display indicates Internal and
press the ENTER key.
To select an option font, press the ENTER key. Press the
repeatedly until the message display indicates Option and press the
ENTER key. This operation is possible only when option fonts are
installed in the printer.
or
key.
key repeatedly until Font > appears.
>
key repeatedly until >Font Select > appears.
>
1-44
or
or
key

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecosys fs-1920Fs-3820nFs-3830n

Table of Contents