Dumping Received Data; Selecting Dump Received Data Mode - Kyocera FS-6900 User Manual

2.13. Dumping Received Data

2.13. Dumping Received Data
It is possible to print data received by the printer as hexadecimal code for the purposes of
debugging programs and files.

Selecting Dump Received Data Mode

1.
Pressing the MODE key will put the printer in Mode Select mode.
Press + or – to select 2WKHUVý!.
2.
3.
Press the key.
4.
Press the + key several times to displayý!3ULQWý+(;ð'803 and press the ENTER
key. Aý" will be displayed.
5.
Press the ENTER key again andý!3URFHVVLQJ will be displayed for awhile followed
byý:DLWLQJ.
6.
Send the data to be dumped to the printer. The printer will displayý3URFHVVLQJ
while it receives the data.
7.
Once all data has been received, the messageý:DLWLQJ will appear. Press the FORM
FEED key to finish printing.
Once the dumped data you require has been output, it is possible to cancel the printing
of any further dumped data by taking the printer offline by pressing the ON LINE key and
then pressing the CANCEL key.
2-38