Dumping Received Data - Kyocera FS-6020 Operation Manual

Chapter 1 Using the Operator Panel

Dumping Received Data

It is possible to print data received by the printer as hexadec-
imal code for the purposes of debugging programs and files.
Press the MENU key.
1
Press the or
2
pears.
Others
Press the key.
3
Press the or
4
HEX-DUMP appears.
>Print HEX-DUMP
Press the ENTER key. A question mark (?) appears.
5
>Print HEX-DUMP?
Press the ENTER key again. Processing appears
6
for a second, and then Waiting appears.
Processing
--- A4 PLAIN
Waiting
--- A4 PLAIN
Send data to be dumped to the printer. The message
7
Processing will be displayed while receiving the
data.
Once the dumped data you require has been output,
it is possible to cancel the printing of any further
dumped data by taking the printer offline by
pressing the CANCEL key and then pressing the
ENTER key.
Once all data has been received, the message
8
Waiting will appear. Press the GO key to finish
printing.
1-14
key repeatedly until Others > ap-
>
key repeatedly until >Print