Output Destination; Override A4/Letter - Kyocera 1650 Advanced Operation Manual

3 Press the Enter key.
4
Press the
bind or Long edge bind.
5 Press the Enter key.
6 Press the Reset key. The message display returns to the printer basic screen.

Output Destination

Set the paper output destination.
Setting
Top tray
Finisher
Job Separator
Note
This item is displayed only if the optional finisher or job separator is installed.
1 Display the Paper Handling screen. (See
page 2-47.)
2 Press the
Select [Stack Slect].
3
Press the Enter key.
4 Press the
paper output destination.
5 Press the Enter key.
6
Press the Reset key. The message display returns to the printer basic screen.

Override A4/Letter

The A4 and 8
1 Display the Paper Handling screen. (See
page 2-47.)
2 Press the
A4/LT.
3
Press the Enter key.
key or the key to select Short edge
Output destination
Output tray of main body
Optional finisher
Optional job separator
key or the key to select Stack
key or the key to select the desired
× 11" (Letter) sizes can be regarded as a size that can be used in common.
1/2
key or the key to select Override
Duplex Mode
Back
None
Short edge bind
How to Display the Paper Handling Screen
Paper Handling
Bypass Mode
Feed Select
Stack Select
Select Output Tray
Back
Top tray
Finisher
How to Display the Paper Handling Screen
Paper Handling
Feed Select
Stack Select
Override A4/LT
Printer Settings
on
on
2-49