Kyocera 1650 Advanced Operation Manual page 63

KC-GL Pen Thickness
If you have selected the KC-GL emulation, you can set the thicknesses of the eight pens and the
page size. Continue the procedure from step 9 of
shown below.
1 Press the key or the
Adjust.
2 Press the Enter key.
3
Press the key or the
4 Press the Enter key.
5 Press the < key or the > key to input the thickness
(number of dots).
6
Press the Enter key.
7 Press the key or the
8 Press the Enter key.
9 Press the key or the
Set.
10
Press the Enter key.
11 Press the key or the
Note
SPSZ is the size specified with the PRESCRIBE SPSZ command. For details of the PRESCRIBE
commands, refer to the
12 Press the Enter key.
13
Press the Reset key. The message display returns to the printer basic screen.
key to select KC-GL Pen
key to select the pen to set.
key to select Back.
key to select KC-GL Page
key to select the page size.
PRESCRIBE Command Reference
Emulation Mode Selection
KC-GL
Back
KC-GL Pen Adjust
KC-GL Page Set
KC-GL Pen Adjust
Back
Pen (1)
Pen (2)
Pen Width
1 dot(s)
KC-GL
Back
KC-GL Pen Adjust
KC-GL Page Set
KC-GL Page Set
B1
B0
SPSZ
Manual.
Printer Settings
to set these items as
(01 99)
2-23