Copier Functions
Continuous Copying
The continuous copying function allows multiple originals to be separated into some blocks, to be
scanned at more than one time, and to be copied in one batch. Since multiple originals of the same
type are scanned in multiple steps to accumulate data in memory, many originals can be copied in
one batch.
1
Set the originals.
2
Press the Function key.
3
Press the
scan.
4
Press the Enter key.
5
Press the
6
Press the Enter key.
7
Press the
8
Press the Enter key.
9
Press the Start key. Scanning of originals starts.
10
Replace the originals and press the Start key. Scanning of originals of the next step starts.
11
When all originals have been scanned, press the Enter key. Copying starts.
1-28
key or the
key to select Continuous
key or the
key to select On.
key or the
key to select End.
Function:
End
Orig. direction
Continuous scan
Continuous scan:
Off
*
On
: Rear
: Off