Selecting Output Destination; Ecoprint - Kyocera KM-2540 Advanced Operation Manual

Ready to copy.
Output Tray
Job Sep.
Tray
Top tray
Finisher
tray
y.
Shortcut
e saves toner.
e lighter.
1-28

Selecting Output Destination

The optional job separator, document finisher or built-in finisher can be
specified as copy output destinations.
Paper Output
Top tray
Job Sep. Tray
Finisher tray
Follow the steps as below to select the output destination.
1
2
3
4
Shortcut Bac
Select proper output tray t
mixing jobs.
You can confirm output tra
management.

EcoPrint

Set EcoPrint mode to save toner consumption. Use this mode when
high-quality copying is not required (e.g., when making test copies).
Follow the below steps to configure EcoPrint.
1
2
3
Paper Size Set
11×8½"
100%
Back Close
EcoPrint
Conserve toner
consumption.
Image is light.
On
Off
Description
Outputs to the top tray of the machine.
Outputs to the optional job separator.
Outputs to the optional document finisher tray or
built-in finisher tray.
Note Requires the optional job separator, document finisher or
built-in finisher.
Change the default destination for copies in default settings
mode. For further details, refer to Selecting Output Destination on
page 3-18.
Press [Function] and then press [
Press [Output Tray].
Select the output destination.
Place the original and press the Start key. Copying begins.
Note The image may appear lighter.
Press [Function] and then press [
Press [EcoPrint].
Press [On]. EcoPrint is enabled.
Down].
Down].
Copy Functions