Offset Copying - Kyocera 1650 Advanced Operation Manual

Copier Functions

Offset Copying

For copying of multiple sets, the orientation of the copies can be changed at the end of each set for
easy classification.
Notes
•
•
•
•
1 Set the original.
2
Press the Offset key.
3
Press the Sort key.
4
Input the number of copies and press the Start key. Scanning of the original starts.
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
5 Replace the original and press the Start key. Scanning of the original is performed.
6
When all originals have been scanned, press the Enter key. Copying starts.
1-18
If the optional document processor or finisher is not installed, use this function with sort
copying.
You can select whether or not to turn on the offset mode at a default setting. (See
Copying on page 3-9.)
When setting the offset copying, turn the auto rotation on. (See
The paper sizes that can be used for offset copying are limited to A4, B5, 11 × 8
Offset
Auto Rotation on page 1-29.)
", and 16K.
1/2