Auto Sleep Time - Kyocera 1650 Advanced Operation Manual

System Menu
Original Orientation
Set the default original orientation.
1 Display the Machine default screen. (See
page 3-12.)
2 Press the
direction.
3
Press the Enter key.
4
Press the
Edge] or Left top [Left].
5 Press the Enter key.
6 Press the Reset key. The message display returns to the copier basic screen.

Auto Sleep Time

Set the time that elapses before the auto sleep function is activated if you have turned on the auto
sleep function (see page 3-23).
Time that can be set:
Inch Specification — 1 to 240 minutes (in 1 minute increments)
Metric Specification — 1 to 120 minutes (in 1 minute increments)
Note
•
•
•
1
Display the Machine default screen. (See
page 3-12.)
2 Press the
time.
3 Press the Enter key.
4 Press the < key or the > key to select the desired time
from 1 to 240 minutes [1 to 120 minutes].
5
Press the Enter key.
3-18
key or the key to select Orig.
key or the key to select Rear [Back
It is recommended to set a longer time if you use the machine frequently, and to set a shorter
time if not.
For the inch specification machine, if the auto sleep function causes inconvenience for
operation of this machine, disable this function. It is recommended, however, to set a longer
time before disabling this function.
On the inch specification machine, if you have disabled the auto sleep function, this item is not
displayed.
key or the key to select Sleep mode
How to Display the Machine Default Screen
Machine default:
P. type (Duplex)
Special P. type
Orig. direction
Orig. direction
Rear
*
Left top
How to Display the Machine Default Screen
Machine default:
Special P. type
Orig. direction
Sleep mode time
Sleep mode:
30Min.
on
: Fast Mode
: Rear
on
: Fast Mode
: Rear
: 30Min.
1-240Min.