System Menu
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Auto Clear
You can set the auto clear function (refer to
Function) that will be activated when the preset time elapses after copying is complete.
1
Display the Machine default screen. (See
page 3-12.)
2
Press the
3
Press the Enter key.
4
Press the
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Auto Clear Time
Set the time that elapses from completion of copying to activation of the auto clear function if you
have turned On the auto clear function (see page 3-24).
Time that can be set: 10 to 270 seconds (in 10 second increments)
Note
This item is not displayed if the auto clear function is off.
1
Display the Machine default screen. (See
page 3-12.)
2
Press the
Timer [Auto clear time].
3
Press the Enter key.
4
Press the < key or the > key to set the time to 10 to 270
seconds.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
3-24
key or the
key to select Auto Clear.
key or the
key to select On or Off.
key or the
key to select Auto Clear
Chapter 1
in
Basic Operation
How to Display the Machine Default Screen
Machine default:
PIN # Change
Auto Sleep
Auto Clear
Auto Clear:
Off
On
*
How to Display the Machine Default Screen
Machine default:
Auto Sleep
Auto Clear
Auto Clear Time
Auto Clear Timer:
90Sec.
Guide,
Auto Clear
on
:
On
:
On
on
:
On
:
On
:
90Sec.
10-270Sec.