E-Mps Function; Printing Quick Copy/Proof-And-Hold - Kyocera 1650 Advanced Operation Manual

Printer Settings

e-MPS Function

The following items can be set in e-MPS function setting.
•
•
•
•
•
•
•
•
Notes
•
•
How to Display the e-MPS Screen
1 Press the Printer key.
2
Press the
3 Press the Enter key.
4 Press the
5
Press the Enter key. The e-MPS screen is displayed.
Next, perform the setting referring to the following description of each setting item.

Printing Quick Copy/Proof-and-Hold

If you set quick copy with the printer driver when printing a document, the data is printed and stored
in the hard disk. When printing is required, you can print a required number of copies from the
operation panel.
If you set proof-and-hold with the printer driver and set the required number of copies to execute
printing, only one set is output and the document data is stored in the hard disk. To print the
remaining number of copies, execute printing from the operation panel. At this time, you can change
the number of copies.
For the method of setting with the printer driver, refer to the
1
Display the e-MPS screen. (See
2-8
Printing Quick Copy/Proof-and-Hold
Deleting Quick Copy/Proof-and-Hold
Printing Private Print/Stored Job
Deleting Private Print/Stored Job
Printing Virtual Mailbox Accumulated Data
Printing Virtual Mailbox List
Printing Code Job List
e-MPS Detail Settings
To use the e-MPS functions, the optional hard disk must be installed. For details on e-MPS,
refer to the KX Printer Driver Operation
Even if the RAM Disk Operation
used. In this case, only proof-and-hold and printing private print can be used.
key or the key to select MENU.
key or the key to select e-MPS.
Guide.
(see page 2-44) is turned On, the e-MPS function can be
How to Display the e-MPS Screen
Ready
GO
CANCEL
MENU
Menu
Back
Print Status Page
e-MPS
KX Printer Driver Operation
on page 2-8.)
Guide.