Kyocera 1650 Advanced Operation Manual page 162

Appendix
Secondary setting has priority.
1
2
3
4
5
6
7
8
9
10 The machine changes the paper feed station because the combination is not available.
Combination is not accepted. (Secondary setting is not accepted.)
21 The auto exposure mode is not available in the image quality mode (photo).
22 Only automatic detection for original size selection is available in the auto selection mode.
23 Only the auto paper selection mode is available in the auto selection mode.
24 Staple copying is not available in the auto selection mode.
25 Duplex copying (one-sided to two-sided) is not available in the auto selection mode.
26 Double-page spread originals cannot be used in the auto selection mode.
27 The magnification ratio is fixed to 100 % in the auto selection mode.
28 The border erase mode is not available in the auto selection mode.
29 Combine copying is not available in the auto selection mode.
30 Combine copying is not available for double-page spread originals.
31 Original size selection (size input) is not available for double-page spread originals.
32 Original orientation is fixed to landscape for double-page spread originals.
33 Combination of margin mode and combine copying is not available.
34 The border erase mode is not available with original size selection (size input).
35 Original orientation is fixed to landscape for the border erase mode (book erase).
36 Combine copying is not available with original size selection (size input).
37 The auto zoom ratio selection mode is selected for combine copying.
38 Offset copying is not available for staple copying.
39 Combination with multi-bypass tray setting (universal size, size input) is not available.
Conditions are limited for combination.
41 For original sizes other than A3, A4R, A5R, B4, B5R, 11 × 17" (Ledger), 8
42 Setting is available for original sizes of A3, A4R, A5R, B4, B5R, 11 × 17" (Ledger), 8
43 Setting is not available in the image quality mode for photo. For other modes, the manual
44 If the auto rotation copying setting is turned off, stapling copying is also turned off (staple
45 For staple copying, sort copying is always set. Sort copying cannot be canceled.
46 Copying is not available with multi-bypass tray setting (universal size, size input). (An error
47 If the original orientation is set to rear and the binding side is set to top or the original orientation
Appendix-14
The machine clears prior setting and gives priority to the later setting.
The machine enters the manual exposure mode because auto exposure is not available in the
image quality mode for photo.
The machine sets the 100 % magnification and the auto paper selection mode because the
auto selection mode is available only in the auto paper selection mode.
The machine sets the original orientation to rear because the orientation for double-page
spread originals is fixed to rear.
The machine sets the original orientation to rear because the orientation in the border erase
mode (book erase) is fixed to rear.
The machine sets the automatic detection of original size because original size selection (size
input) is not available for double-page spread originals.
The machine sets the auto zoom ratio selection mode because combine copying is available
only in the auto zoom ratio selection mode.
The machine clears offset copying because it cannot be used with staple copying.
The machine cancels the auto zoom ratio selection mode and sets the manual zoom mode.
8K, this machine changes the original size selection to automatic detection and sets the
double-page spread original mode.
(Letter), and 8K. Setting is not available for other sizes.
exposure mode is canceled and the auto exposure mode is set.
copying cancellation message is displayed). If the auto rotation copying is turned on, stapling
copying setting is not changed.
message is displayed.)
is set to left and the binding side is set to left for copying from the document processor, copying
is not available with multi-bypass tray setting (universal size). (An error message is displayed.)
× 11" (Letter), and
1/2
× 11"
1/2