Original Orientation - Kyocera 1650 Advanced Operation Manual

Copier Functions

Original Orientation

You must specify the orientation of the original when using the following functions: duplex copying,
split copying (from 2-sided originals), margin mode, border erase mode, combine copying, auto
selection mode (optional), and staple copying (optional).
When the originals are set on the platen:
When the originals are set in the document processor:
Note
You can change the default setting of the orientation of the original. (See
page 3-18.)
1
Press the Function key.
2 Press the
direction.
3 Press the Enter key.
4
Press the
Edge] or Left top [Left].
5
Press the Enter key.
1-10
Original
Original
key or the key to select Orig.
key or the key to select Rear [Back
Rear Left top
Rear Left top
Function:
End
Orig. direction
Continuous scan
Orig. direction:
Rear
*
Left top
Original Orientation on
: Rear
: Off