Selecting Output Destination - Kyocera Mita C2525E Advanced Operation Manual

Copy Functions

Selecting Output Destination

The optional job separator, document finisher, 3000 sheet document finisher or mailbox can be
specified as copy output destinations.
Paper Output
Top tray
Job separator
Finisher tray
Tray A
Tray B
Tray C
Tray 1 - 7
NOTE: Requires the optional job separator, document finisher, 3000 sheet document finisher or
mailbox.
Change the default destination for copies in default settings mode. For further details, refer to
Selecting Output Destination on page 7-22.
Follow the steps as below to select the output destination.
1 Press [Function] and then press [
2 Press [Select of Output].
3 Select the output destination.
4 Place the original and press the Start key. Copying begins.
1-42
Description
Outputs to the built-in output tray.
Outputs to the optional job separator.
Outputs to the optional document finisher tray.
Outputs to Tray A of the optional 3000 sheet document finisher.
Outputs to Tray B of the optional 3000 sheet document finisher.
Outputs to Tray C of the optional 3000 sheet document finisher.
Outputs to Trays 1 - 7 (1 is the uppermost tray) of the optional mailbox.
Down].
Ready to copy.
Select of Output
Job
separator
Top tray
Tray A
Tray B
( Full-Color ) Paper Size
Shortcut Back
Tray C Tray 4
Tray 1 Tray 5
Tray 2 Tray 6
Tray 3 Tray 7
11×8
100%