Default Setting Mode; Copier Default Settings - Kyocera 1650 Advanced Operation Manual

System Menu

Default Setting Mode

For this machine, the state that the machine enters at the end of warm-up or when the Reset key is
pressed is called initial mode. The settings of this machine that are made automatically in the initial
mode are called default settings. The default settings are divided into the
and the
of use.

Copier Default Settings

You can set the following items as copier default settings.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
How to Display the Copy Default Screen
Use the following procedure to display the Copy Default screen.
1 Press the System Menu/Counter key.
2 Press the
default.
3
Press the Enter key.
4 Use the numeric keys to input the four-digit
management code. The management code at the
factory default setting is 1600 for the 16 ppm model,
2000 for the 20 ppm model, and 2500 for the 25 ppm
model.
3-2
Machine Default Settings. These settings can be changed freely according to the method
Exposure Mode
Original Image Quality
EcoPrint Mode
Background Color Adjustment
Paper Selection
Paper Type in Auto Paper Selection
Priority Cassette
Default Magnification
Auto Exposure Adjustment
Auto OCR Exposure Adjustment
Exposure Adjustment for Text + Photo Originals
Exposure Adjustment for Text Originals
Exposure Adjustment for Photo Originals
Sort Copying
Offset Copying
Auto Rotation Copy
Margin Width Default Value
Border Erase Width Default Value
Limit of Number of Copies
Black Streaking Reduction Processing
key or the key to select Copy
Copier Default Settings
System Menu / Counter:
Print Report
Job Accounting
Copy default
Enter pin code using # key.