Network Setting - Kyocera 1650 Advanced Operation Manual

4 Press the
transmission/reception mode for the parallel interface.
5
Press the Enter key.
6 Press the Reset key. The message display returns to the printer basic screen.

Network Setting

To perform network printing, network setting is required. This section describes the setting required
for using the network function.
Note
Before setting the IP address, ask your network administrator to obtain the address and prepare it.
NetWare Frame
When connecting to a NetWare network, turn this setting On.
1
Display the Interface screen. (See
2 Press the
3 Press the Enter key.
4
Press the
5 Press the Enter key.
6 Press the
7
Press the Enter key. If you have selected On, Change # is displayed.
8
Press the
9 Press the Enter key.
10 Press the
mode.
11
Press the Enter key.
key or the key to select the desired
key or the key to select Network.
key or the key to select NetWare.
key or the key to select On or Off.
key or the key to select Change #.
key or the key to select the frame
Parallel
How to Display the Interface Screen
Interface
Network Setting
NetWare
NetWare
NetWare Frame
Printer Settings
Back
Auto
Normal
on page 2-16.)
Back
Parallel
Network
Back
NetWare
TCP/IP
Back
On
Off
On
Off
Change #
Back
Auto
802.3
2-17