E-Mps Function; Printing A Quick Copy - Kyocera TASKalfa 820 Operation Manual

e-MPS Function

The e-MPS is an abbreviation for enhanced-Multiple Printing System which implements the
following functions that are available from the printer driver:
The following settings are available:
•
•
•
•
•
•
•
Important!
•
•

Printing a Quick Copy

This mode enables you to print the requested number of copies of a job, simultaneously storing the
job on the hard disk/RAM disk. When additional copies are required, you can reprint the required
number of copies from the printer operator panel.
The default number of print jobs that can be stored on the hard disk is 32. This value can be
increased to up to 50 from the configuration menu.
Important!
•
•
1 Press the [Printer] key. The machine enters the printer mode.
2
Press [e-MPS].
3 Press [Quick Copy].
4 Press  or  to select the user name
required and press [Next].
Printing a Quick Copy
Using Proof-and-Hold
Printing a Private Print/Stored Job
Retrieving Jobs from Virtual Mailbox (VMB)
Printing a List of Virtual Mailbox (VMB)
Printing a List of Code Jobs
Changing e-MPS Configuration
To use the e-MPS functions, the optional Hard Disk must be installed. For details on e-MPS,
refer to the Printer Driver User Guide.
If the RAM Disk is switched On, the e-MPS function can still be used for proof-and-hold jobs,
private print jobs, and printing a list of code jobs. Refer to Activating the RAM Disk on
page 2-34.
When the number of jobs reaches the limit, the oldest job will be overwritten by the new one.
When the printer is turned off, all stored jobs will be deleted.
Selecting the Printer Settings
Select item.
e-MPS
Quick Copy List of Configu -
VMB ration
Private/ List of
Stored Code JOB
Print VMB
Data Tray
Select the user name.
User
DataH001
DataH002
DataH003
DataH004
DataH005
DataH006
DataH007
e-MPS
Up
Down
2-37