Start A Training Session - Polar Electro M400 User Manual

START A TRAINING SESSION

Wear the heart rate sensor, and make sure you have paired it with your M400.
In time view, press START to enter pre-training mode.
Choose the sport profile you want to use with UP/DOWN.
To change the sport profile settings before starting your session (in pre-
training mode), press and hold LIGHT to enter the
the pre-training mode, press BACK.
If you have activated the GPS function, M400 will automatically start search-
ing for the signals.
Stay in the pre-training mode until M400 has found GPS satellite sig-
nals and your heart rate sensor to make sure your training data is
accurate.
To catch the GPS satellite signals, go outdoors and away from tall buildings
and trees. For best GPS performance, wear M400 on your wrist with the dis-
play facing up. Keep it in a horizontal position in front of you and away from
your chest. Keep your arm stationary and raised above the level of your chest
during the search.Stand still and hold the position until M400 has found the
satellite signals.
The percentage value shown next to the GPS icon indicates when the GPS
is ready. When it reaches 100 %, OK is displayed, and you are ready to go.
M400 has found your heart rate sensor signal, when your heart rate is shown.
When M400 has found all the signals, press START.
displayed and you can start training.
GPS acquisition is fast with the help of assisted GPS (A-GPS). The A-GPS
data file is automatically updated to your M400 when you sync your M400
with the Flow web service via FlowSync software. If the A-GPS data file has
expired or you haven't synced your M400 yet, more time may be required for
acquiring the current position. For more information, see
GPS).
31
Quick Menu. To return to
Recording started
Assisted GPS (A-
is