2
3) Click on [Start] or [Stop] button shown on Status field of SMS Installer Service (Remote
Login Service Authentication) to check if the status is changed.
4) Log out and then log in again and access via the RLS authentication login window.
When RLS authentication is set to [Start], another RLS login screen is firstly shown. When
accessing to RLS status screen with the setting of [Stop], the user will be redirected to the
password authentication screen.
RLS authentication started screen and RLS authentication stopped screen
2
Checking MEAP Application Management Page
Application Management page shows [resource information] for information of the whole
device resources including Amount Used, Remaining, and Percent Used.
This function enables users to judge the remaining resources before installing the additional
application. Such resource information is shown based on the manifest header stated at the
top of each application, which declares the resources required in the application. Therefore,
the information does not necessarily show the resources actually in use.
The following resource information is shown:
•
hard disk
•
memory
•
thread
•
socket
file descriptor
•
You will not be able to install an application if the size of the remaining memory falls short
F-2-169
F-2-169
of the size declared by the application. Moreover, the specifications have been designed so
that an application will not be able to start up if there is a shortage of memory for any of the
foregoing items (i.e., memory, thread, socket, file descriptor).
Follow the steps below to check the remaining memory:
1) Log in to SMS.
2) Click [MEAP Application Managemnet].
3) Check [Resource Information] for information of the whole device resources.
•
Amount Used
•
Remaining
•
Percent Used
F-2-170
F-2-170
2-114
F-2-171
F-2-171
2-114