Fixing Temperature Control: Overview; Standby Temperature Control; Panel - Canon imageRUNNER ADVANCE C5045 Series Service Manual

2
Controls

Fixing temperature control: overview

Fixing
temperature
STBY INTR
Flying start Startup
control (warm-up
temperature rotation)
control
temperature
Command for Command for
flying start print start
•

Standby temperature control

To preheat the fixing assembly to reduce time for starting print
•
Flying start temperature control
• Print temperature control
To increase temperature to meet the fixing target temperature and keep the target
temperature during printing
Startup (warm-up rotation) temperature control
•
•
Print temperature control
• Sheet-to-sheet temperature control
Down sequence control
•
To prevent fixing failure due to rising temperature at the edge or fall in temperature.
This control causes reduced through-put.
Down sequence when feeding small size paper
•
Down sequence when switching paper size
•
2
PRNT
During-print Sheet-t
control o-sheet
temperature control
temperature
Time
F-2-122 F-2-122
Standby temperature control
Fixing
temperature
STBY INTR
Flaying start
control
temperature
15 sec
Command for
flying start
•
Flying start temperature control
Purpose:
to reduce print time (FPOT) of the 1
Starting conditions:
•
When pressing the numeric key on the control panel
•
When pressing the button / key on the touch panel
• When opening / closing the cassette
•
At recovery from sleep mode to standby mode
Control description:
Temperature rises to a certain point (150 degrees Centigrade: Main Thermistor 2).
This operation takes for 15 seconds after the last operation.
PRNT
st
sheet
2-78
Time
F-2-123 F-2-123
2-78