Initialize Default Parameters Dialog Box; Description; File Format Details; Supported Tags - Kodak RP 50 2J0686 Operator's Manual

Using the Image Print Server Software
D-10

Initialize Default Parameters Dialog Box

Description

This dialog box appears if you press the Resume button (or activated through the
menu bar) before the Source Directory Preferences have been initialized.

File Format Details

The data portion of the TIFF file must contain RGB byte interleaved data. The
specific TIFF tags that are supported are shown below.

Supported Tags

The Image Print Server supports the TIFF tags listed below. The range of legal
values for TIFF tags 256, 257, 258, 273, 278 and 279 are image dependent. If
these values are incorrect, an error will occur while reading the image data and an
appropriate error message will be placed in the log file. Values indicated in the
*
table below by a " " are image dependent.
TIFF Tag ID
256
257
258
262
273
277
278
279
284
*indicates an image dependent value.

LZW Compression

The IPS does not support LZW compression.
Name
Image Width
Image Length
Bits per Sample
Photometric Interpretation
Strip Offset
Samples per Pixel
Rows per Strip
Strip Byte Count
Planar Configuration
Valid Range
*
*
*
2
*
3
*
*
1
October 2002