Producing Borderless Prints - Kodak RP 50 2J0686 Operator's Manual

System Operating Procedures
3-20

Producing Borderless Prints

To achieve borderless prints on both the front and back edges of the paper, you
must set the Page Starts value to adjust the location of the image so that both
edges of the image print off the paper.
NOTE: The image width should be at least 76 pixels wider than the width of the
paper to ensure a borderless print.
Paper Size
10 inch
11 inch
12 inch
20 inch
A4
outline of the paper
outline of the image
back edge
If white borders are present on either the front or back edge of the print:
1. Measure the white border at both the lead (distance A) and the trail edge
(distance B) and determine its average width.
2. Convert the average width of the white border to a pixel value. To do this,
multiply the width by 250 and add 76.
Image Width in Pixels
2576
2826
3076
5076
3000
page start
front edge
October 2002