Additional Calibration Information
Procedure
Attribute
Graphing
Tolerance Level
Out of Tolerance
Maximum Cycles
Processor In Control
C-22
Editing Information on the Procedure Tab
The Procedure tab contains general configuration attributes as shown and
described below. The values displayed in the example are the default settings.
Instructs the application when to display the graphs of the data
Indicates whether the level of tolerance is Normal, Loose, or Strict
Provides the flexibility to interact at each step or to use a fully
automated calibration
Indicates the maximum number of iterations the calibration
procedure will perform if "Out of Tolerance" is set to "Automatically
iterate up to maximum cycles.".
Indicates whether the Processor In Control dialog box is to be
displayed at the beginning of the calibration process
Description
October 2002