Table of Contents
Advertisement
Graphs icon
October 2002
The LED Calibration Application screen appears.
2. Click the Graphs icon.
One of the graphs appears; normally it is the Value graph.
3. Select the Graph Type that you want to view. When the graph appears, select
the type of data and planes that you want to see displayed.
NOTE: The graph will be blank if the printer has not been calibrated.
Sending LUTs
The Send LUT to Printer feature allows you to overwrite the current LUT in the
printer. You can create a valid printing LUT using an ASCII text editor. This option
sends the selected LUT to the printer, overwriting any existing LUT.
To send a LUT to the Printer:
1. From the KODAK Device Calibration screen, double-click the device for which
you want to send a LUT.
Additional Calibration Information
C-15
Advertisement
Table of Contents
Troubleshooting
