Table of Contents
Advertisement
System Operating Procedures
About Printing
3-24
Changing the Units of Measurement for Paper Sizes
1. Select "Setup" from the main menu on the OCP.
2. Select "Printer".
3. Select "More".
4. Select "Units".
5. Select "Units" again.
6. Use the Up and Down Arrows to select either "English" or "Metric".
7. Press Select to select/set the new value.
IMPORTANT: Select "Exit" to return to the previous menu on the OCP.
•
A print job is not printed until it is completely downloaded to the printer.
•
Print jobs are printed in the order they are received.
•
If multiple copies of a print job are requested, they are positioned next to each
other down the length of the roll, regardless of the width of the image.
•
It takes the same amount of time to print (expose the paper) a length of 6.5
inches as it does to print 33 inches.
Image Size
The minimum image length is 6.5 inches (1625 pixels). White space is
automatically added to images smaller than 6.5 inches to increase the image size
to this minimum.
The minimum sheet length is 8 inches. A sheet that is cut for an image less than
this size will have white space added to it to increase it to this minimum length.
The maximum image length is approximately 33 inches (8248 pixels).
Buffered and Unbuffered Jobs (or Immediate and
Deferred)
Jobs can be stored in memory when downloaded from the host until enough jobs
are downloaded to maximize the printing that occurs during the print cycle.
Most host applications have an option to indicate whether to print the job as soon
as it completes downloading to the printer or to wait until the printer has a full
buffer to print.
If the print job is sent to the printer with the Unbuffered/Immediate option, the job
will be printed as soon as it completes downloading to the printer. Regardless of
the number of (or size of) the jobs in the printer waiting to print, jobs sent with this
option are printed separately.
October 2002
Advertisement
Table of Contents
Troubleshooting
