Error
Error Message
Code
132
knife at both limits
133
timeout sheet xport
reply
134
duart self test failed
192
Various software error
–
messages.
219
October 2002
Possible Cause
Both the front and back knife limit
switches are actuated.
The 300 board does not reply to the
200 board within the expected
amount of time.
Duart test failed when the printer
was turned on.
A software problem has occurred.
Diagnostics and Troubleshooting
Possible Solution
Call for service.
Call for service.
Call for service.
Shut down and restart the printer.
Call for service.
5-9