Radio Mode; Media Mode - Mercedes-Benz COMAND Operating Instructions Manual

Media mode

252
Calling up the Internet functions menu:
Press the % button on the remote
X
control while using the Internet function.
Exiting the Internet functions:
Press the % button on the remote
X
control.
A menu appears.
Select the Ü symbol in the menu and
X
press the 9 button on the remote control
to confirm.
or
Select another function (e.g. Media or
X
Radio).
Further information on using online and
Internet functions (

Radio mode

Switching to radio mode
Press button $ on the remote control.
X
Radio mode starts.
Further information on radio mode
( page 178).
Y
Media mode
Activating media mode
There are several ways to activate media
sources using COMAND.
The relevant sections of the Operator's
Manual describe the simplest way to activate
a media source.
This section describes all options for
activating media sources.
Using the MEDIA button
Press button Õ on the remote control.
X
The menu for the last accessed media
source appears.
To select the media source: keep
X
pressing the Õ button on the remote
page 158).
Y
control until the required media source has
been set.
If playable music files are found, they will
be played by COMAND.
Switching on automatically
If COMAND is only active at one operating
position in the rear compartment, the
respective medium will switch on
automatically once connected/inserted.
If a media function is already switched on in
COMAND, this will be interrupted and the
basic display of the newly connected/
inserted medium will appear.
If COMAND is being operated in another
function, such as navigation, when an
external media source is connected/
inserted, the basic display will not change.
Only the music from the newly connected
data carrier will play.
Starting media playback using the
main function bar
To show the menu: press the 9 button
X
on the remote control.
Select Media Media using the =; buttons
X
on the remote control and press the 9
button to confirm.