Mercedes-Benz COMAND Operating Instructions Manual page 45

Connecting a device via WPS PIN
Prerequisite:
For this type of connection, the device to be
connected must support "Connect using WPS
PIN".
To select Vehicle Vehicle in the main function bar:
X
turn the controller and press to confirm.
To switch to the menu bar: slide V¬ the
X
controller.
Select System System Settings Settings.
X
The system settings menu is shown.
Select WiFi WiFi.
X
The WLAN menu appears.
Select Connect Via WPS PIN Connect Via WPS
X
Select the vehicle from the device to be
X
connected and "Connect using WPS PIN".
The vehicle is displayed with the SSID
WLAN XXXXX WLAN XXXXX.
The device to be connected generates a
PIN.
This PIN is also entered on COMAND.
X
Connecting the device by pressing a
button (push button)
Prerequisite:
For this type of connection, the device to be
connected must support "Connect via push
button".
To select
X
turn the controller and press to confirm.
To switch to the menu bar: slide V¬ the
X
controller.
Select
X
The system settings menu is shown.
Select
X
The WLAN menu appears.
Select
X
Select the vehicle from the device to be
X
connected and "Connect via WPS PBC".
The vehicle is displayed with the SSID
WLAN XXXXX WLAN
Select
X
Connecting the device via SSID and
security key
PIN.
MB MB
Example display
To select
X
turn the controller and press to confirm.
To switch to the menu bar: slide V¬ the
X
controller.
Select
X
The system settings menu is shown.
Select
X
The WLAN menu appears.
Select
X
Select the vehicle from the device to be
X
connected. The vehicle is displayed with
the SSID
Vehicle Vehicle in the main function bar:
System System Settings Settings.
WiFi. WiFi
Connect via WPS Connect via WPS PBC PBC.
XXXXX.
Continue Continue on COMAND.
Vehicle Vehicle in the main function bar:
System Settings System Settings.
WiFi WiFi.
Connect Using Security Connect Using Security Key
MB WLAN MB WLAN XXXXX XXXXX.
WLAN
43
MB MB
Key.