Mercedes-Benz COMAND Operating Instructions Manual page 156

Using the address book
154
It is not necessary to authorize the device in
COMAND to do so.
Please bear the following in mind:
®
Bluetooth must be activated in COMAND
R
and on the Bluetooth
operating instructions for the device.
R the Bluetooth
vCards via Bluetooth
instructions for the device).
the Bluetooth
R
be switched on.
Importing from the memory card or USB
device
Entries imported from the memory card or
from a USB device have the ¯ symbol.
The following conditions must be fulfilled in
order to import vCards:
vCards (vcf files) may be located in the main
R
directory or in folders. COMAND allows you
to select the relevant folders directly.
vCards must have the file extension ".vcf".
R
i
One vcf file may contain several vCards.
COMAND supports vCards in versions 2.1
and 3.0.
To change to the menu bar when in the
X
address book or the telephone basic menu:
slide VÆ the controller.
To select Options: turn and press the Options
X
controller.
To select Import Contacts Import
X
controller and press to confirm.
A menu appears.
To select From Memory From
X
Device Device in the menu: turn the controller and
press to confirm.
®
device, see the
®
device must be able to send
®
(see operating
®
device in the vehicle must
Contacts: turn the
Memory Card Card or From USB From
Receiving vCards via Bluetooth
To change to the menu bar when in the
X
address book or the telephone basic menu:
slide VÆ the controller.
To select Options: turn and press the Options
X
controller.
To select Import Import Contacts
X
controller and press to confirm.
A menu appears.
To select From Bluetooth Device From Bluetooth
X
the controller and press to confirm.
This interrupts the Bluetooth
between COMAND and your active mobile
phone. COMAND is, however, ready to
receive vCards from another Bluetooth
device (PC, mobile phone).
Start the data transfer on the external
X
®
Bluetooth
instructions for the device).
The number of vCards received is
displayed.
To end reception: press the controller or
X
the % button.
COMAND then reconnects to the mobile
phone.
Received vCards are identified by the ®
symbol in the address book.
i
If you switch to another main function,
e.g. navigation, while receiving vCards, the
reception of vCards will be terminated.
Deleting contacts
To change to the menu bar when in the
X
address book or the basic telephone menu:
USB
slide VÆ the controller.
To select Options Options: turn and press the
X
controller.
To select Delete Delete Contacts
X
controller and press to confirm.
Select one of the following options:
X
Internal Contacts Internal Contacts
R
Imported From Storage Devices Imported From Storage Devices
R
Contacts: turn the
Device: turn
®
connection
device (see the operating
Contacts: turn the
®
®