Mercedes-Benz COMAND Operating Instructions Manual page 261

remote control and press the 9 button to
confirm.
The system executes the function or shows
a submenu.
If available, additional options can now be
X
selected.
The system then switches back to the DVD
menu.
i
Menu items which cannot be selected are
shown in gray.
i
Depending on the DVD, certain menu
items may not function. For example, the
menu items:
Back (to movie) Back (to movie)
R
Play Play
R
Stop Stop
R
E
R
F
R
Go Go Up Up.
R
To indicate this, the K symbol then
appears in the display.
Stopping a film or skipping to the
beginning or end of a scene
Select any menu item from the DVD menu.
X
The menu appears.
To stop the film: select the
X
item and press the 9 button on the remote
control to confirm.
To skip to the end of a scene: select the
X
F menu item and press 9 to confirm.
To skip to the start of a scene: select the
X
E menu item and press 9 to confirm.
Moving up one level in the DVD menu
Show the DVD menu.
X
Press the % back button on the remote
X
control or select the corresponding menu
item in the DVD menu.
Back to the movie
Press the % button repeatedly until you
X
see the movie.
Setting the audio format
This function is not available on all DVDs. If it
is available, you can set the audio language
or the audio format. The number of settings
is determined by the DVD content. It may also
be possible to access the settings from the
DVD menu.
Press the 9 button on the remote control
X
and show the menu.
Select
X
9:=; buttons on the
remote control and press the 9 button to
confirm.
Select
X
button to confirm.
Select
X
button to confirm.
A menu appears after a short while.
The # dot in front of an entry indicates the
currently selected language.
Select the language using the 9:
X
buttons and press the 9 button to confirm.
Stop Stop menu
To exit the menu: press the =
X
or ; button.
Subtitles and camera angle
These functions are not available on all DVDs.
The number of subtitle languages and camera
angles available depends on the content of
the DVD. It may also be possible to access
the settings from the DVD menu.
Press the 9 button on the remote control
X
and show the menu.
Select
X
9:=; buttons on the
remote control and press the 9 button to
confirm.
Video DVD mode
DVD-Video DVD-Video using the
DVD Functions DVD Functions and press the 9
Audio Language Audio Language and press the 9
Video DVD Video DVD using the
259
Z