Mercedes-Benz COMAND Operating Instructions Manual page 187

To call up the category list: select
X
Category Category in the menu bar: slide VÆ and
press the controller.
The category list appears.
To select a category: turn the controller
X
and press to confirm.
The category selected is shown in the
display. You hear the station last selected
for this category.
The # dot indicates the current setting.
The All Channels All Channels
of the category list. This category enables
you to browse all available channels.
Selecting a channel
Channel search
When the display/section window is
X
selected, slide XVY the controller.
COMAND searches in both directions
(ascending and descending) and stops at
the next channel found in the selected
category.
Entering channel numbers directly
To select Options Options
X
VÆ and press the controller.
The satellite radio menu appears.
To select Enter Enter Channel Channel: turn and press
X
the controller.
An input menu appears.
For the channel number, press the
X
corresponding number keys on the control
panel one after the other.
COMAND sets the selected channel.
i
You can only select currently permitted
digits.
category is at the top
in the menu bar: slide
Selecting a channel via the satellite
radio station list
You can select the channel using the satellite
station list or using the current station list
displaying the artists and tracks that are
currently playing.
To select Options Options
X
VÆ and press the controller.
To select Current Station List with Current Station List with
X
Artist & Title Artist & Title: turn and press the
controller.
The channel list appears.
Select the desired channel
X
Keyword search
To select the keyword search è in the
X
menu bar: slide VÆ and turn the controller.
To enter the required search term: turn and
X
press the controller.
Direct and indirect results are shown.
Select the required result.
X
The relevant channel is played.
Satellite radio
in the menu bar: slide
185