Mercedes-Benz COMAND Operating Instructions Manual page 89

Accepting a way point
To select Start Start: press the controller.
X
The way point is entered into the way point
menu.
To select details: turn and press the
X
controller.
To make a call: select
X
i
COMAND switches to telephone mode
( page 131).
Y
This menu item is available if the way point
has a telephone number and if a mobile
phone is connected to COMAND
( page 124).
Y
To call up the map: select
X
You can move the map and select the
X
destination.
To store a way point in the destination
X
memory: select Save Save
Editing way points
You can:
change way points
R
change the sequence in the way point
R
menu
delete way points
R
Call. Call
Map. Map
( page 106).
Y
Destination input
To select a way point in the way point menu:
X
turn the controller and press to confirm.
A menu appears.
To change the way point: in the menu,
X
select Edit. Edit
i
You cannot edit POIs.
Change the address, e.g. the city and
X
street.
To select OK: turn and press the controller. OK
X
The way point menu appears and displays
the modified way point.
You can change the sequence of the way
points and the destination. To change the
sequence, at least one way point and the
destination must be entered.
To change the order: in the menu, select
X
Move. Move
Turn the controller and move the way point
X
or destination to the desired position.
Press the controller.
X
To delete way points: In the menu, select
X
Delete Delete.
Accepting way points for the route
To select Start Start from the way point menu:
X
press the controller.
The route is calculated with the entered
way points.
i
If Calculate Alternative Routes Calculate Alternative Routes
switched on in the basic settings, instead
of Start Start, the menu item
( page 72).
Y
87
is
Cont. Cont. is shown
Z