Changing The Loudspeaker Source; Equalizer - Mercedes-Benz COMAND Operating Instructions Manual

To select Sound Sound in the menu bar: turn and
X
press the controller.
The menu with the last accessed setting
appears.
Turn the controller until
X
brought to the front.
To activate rotary menus for treble, mid-
X
range and base: slide VÆ the controller.
To switch between the rotary menus: slide
X
XVY the controller.
To make the desired
X
turn the controller.
Rotary menus show the set values.
To return to the menu: slide ZV the
X
controller.
To return to the basic menu: press the
X
% button briefly.
Adjusting the balance/fader
Balance moves the focus of the sound
between left and right.
Fader moves the focus of the sound between
front and rear.
To display the menu bars: slide VÆ the
X
controller in media mode.
To select Sound Sound in the menu bar: turn and
X
press the controller.
The menu with the last accessed setting
appears.
Turn the controller until
X
brought to the front.

Equalizer

Equalizer is
Equalizer Equalizer settings:
Balance/Fader Balance/Fader is
To activate rotary menus for balance and
X
fader: slide VÆ the controller.
To switch between the rotary menus: slide
X
XVY the controller.
To set the desired Balance/Fader Balance/Fader
X
focuses: turn the controller.
Rotary menus and the image show the
sound focus set.
To return to the menu: slide ZV the
X
controller.
To return to the basic menu: press the
X
% button briefly.
Changing loudspeaker source
Switch Speaker Source Switch Speaker Source
seat-based media source shall be output on
the speaker system.
Example: a media source is being listened to
using headphones in the left-hand rear seat.
If this media source is to be listened to using
the sound system, Rear Left Rear Left
selected in Switch Speaker Switch Speaker Source
i
If the loudspeaker source is set to a seat
where no playback is activated, nothing can
be heard on the vehicle loudspeaker.
To display the menu bars: slide VÆ the
X
controller in media mode.
To select Sound Sound in the menu bar: turn and
X
press the controller.
The menu with the last accessed setting
appears.
Turn the controller until
X
Source Source is in the center.
Sound settings
specifies which
must be
Source.
Switch Speaker Switch Speaker
231