Mercedes-Benz COMAND Operating Instructions Manual page 238

Burmester
236
Adjusting the balance/fader
You can use balance to move the focus of the
sound between left and right.
You can use fader to shift the focus of the
sound between the front and rear seats.
To display the menu bars: slide VÆ the
X
controller in media mode.
To select Sound Sound
X
press the controller.
The menu with the last accessed setting
appears.
Turn the controller until
X
in the center.
Slide VÆ the controller.
X
Rotary menus for balance and fader are
activated.
To switch between the rotary menus: slide
X
XVY the controller.
To set the desired
X
focuses: turn the controller.
Rotary menu and the image show the sound
focus set.
To return to the menu: slide ZV the
X
controller.
To return to the basic menu: press the
X
% button briefly.
®
high-end 3D surround sound system
in the menu bar: turn and
Balance/Fader Balance/Fader
Balance/Fader Balance/Fader
Changing loudspeaker source
Select Sound Select Sound Source Source
based media source shall be output on the
speaker system.
Example: A media source is being listened to
using headphones in the
media source is to be listened to using the
sound system, Rear Rear Right
in Select Sound Select Sound Source
To display the menu bars: slide VÆ the
X
controller in media mode.
To select Sound Sound
is X
press the controller.
The menu with the last accessed setting
appears.
Turn the controller until
X
Source Source is in the center.
Slide VÆ the controller.
X
Rotary menus for the speaker source are
activated.
To set the desired speaker source: turn the
X
controller.
The segment, text and image show the
selected setting.
To return to the menu: slide ZV the
X
controller.
To return to the basic menu: press the
X
% button briefly.
specifies which seat-
Rear Rear Right Right. If this
Right must be selected
Source.
in the menu bar: turn and
Select Sound Select Sound