Mercedes-Benz COMAND Operating Instructions Manual page 150

Using the address book
148
Adding the sender to an address book
entry
Press W the controller while the message
X
is being displayed.
Text messages:
X
To select Save Save Number
controller.
E-mails:
X
To select Save Sender's E-Mail Save Sender's E-Mail
Address: turn and press the controller. Address
To select Add Add: turn and press the controller.
X
Proceed from the step "Selecting a
X
category" (
Y
Deleting messages
Call up the message folder (
X
To select the message: turn and press the
X
controller.
To select the list symbol on the right-hand
X
side next to the message: slide VY and
press the controller.
To select Delete: turn and press the Delete
X
controller.
A deletion prompt appears.
To select Yes Yes
X
controller.
If you select
If you select
canceled.
i
This delete function is not supported by
all mobile phones. The
message appears.
Using the address book
Introduction
Always pay attention to traffic conditions.
Before starting the journey, familiarize
yourself with the address book functions.
Only use COMAND when the road and traffic
conditions permit. You could otherwise
Number: turn and press the
page 137).
page 144).
Y
or No: turn and press the No
Yes, the message is deleted. Yes
No, the process will be No
Delete Failed Delete Failed
become involved in an accident in which you
or others could be injured.
The address book organizes and stores
entries that are entered from different
sources (mobile phone, memory card, USB
device, COMAND phone book, navigation
system).
You can use these entries to make telephone
calls and for navigation.
i
Number of contacts in the address
book: the address book can store a total of
5000 contacts.
Of these:
2000 entries are reserved for
R
permanently saved contacts and
3000 entries are reserved for contacts
R
that you can load from the mobile phone.
i
Display of mobile phone contacts:
contacts downloaded from the mobile
phone will no longer be displayed in the
address book if you disconnect the mobile
phone from COMAND. However, the
contact data of the last two mobile phones
connected are still stored in an internal
memory. When the relevant mobile phone
is reconnected, the contacts are displayed
immediately. When automatic download is
activated ( page 153), COMAND
Y
downloads the mobile phone contacts
again and updates the address book.
When the mobile phone is removed, only
the phone book entries from the mobile
phone are removed from the address book.
The remaining entries are retained. For this
reason, delete your personal data using the
reset function before selling your vehicle,
for example ( page 48).
Y
Calling up the address book
Using the telephone button:
Press the % button one or more times.
X