Mercedes-Benz COMAND Operating Instructions Manual page 135

Putting a call through to the rear
compartment and retrieving it
You can put a call through to the Rear Seat
Entertainment System. The call is output
through the rear loudspeakers and the rear
microphones are used.
To switch to the menu bar: slide VÆ the
X
controller.
To select Send Call to Rear Send Call to
X
press the controller.
In the bottom menu bar, the
COMAND COMAND entry is now visible.
Retrieving the call:
Select Call to COMAND Call to COMAND.
X
Calls with several participants
Rejecting or accepting a waiting call
The mobile phone network provider must
support and activate the call-waiting function.
Depending on the mobile phone used, the
system behavior differs when accepting a
call.
If you have a call in progress and receive
another call, a new window appears in the
display. You also hear a tone. You can accept
or reject the call.
Rejecting:
To select Reject: turn the controller and Reject
X
press to confirm.
or
Press the ~ button on COMAND or on
X
the multifunction steering wheel.
Accepting:
Press the 6 button on COMAND or on
X
the multifunction steering wheel.
The system behavior after accepting the
incoming call depends on your mobile phone.
The mobile phone supports the call waiting
R
function (via Bluetooth
Rear: turn and
Call to Call to
®
) when:
Using the telephone
The previously active call is held. You can
then switch back and forth between both
calls (toggling) ( page 134).
Y
The mobile phone does not support the call
R
waiting function (via Bluetooth
The previously active call is ended.
This is also the case if you accept the
waiting call using the Voice Control System
(see the separate operating instructions).
The COMAND display changes. If you
continue to operate functions on the mobile
phone, the COMAND display may differ from
that of the mobile phone.
Making a second call
If the following requirements are met, you can
make another call while on the phone with
someone else. This action puts the previous
call on hold.
The function has to be supported by the
R
mobile phone network.
The mobile phone has to support the
R
connection of a further call via Bluetooth
The appropriate setting has to be activated
R
on the mobile phone.
Making a second call
:
To select ° : turn and press the controller.
X
2
or
Press the 6 button on COMAND.
X
Enter the phone number:
X
manually ( page 131)
R
Y
using the phone book (
R
133
®
) when:
®
.
page 135)
Y
Z