Important Safety Notes; Radio Mode - Mercedes-Benz Audio 15 Operating Instructions Manual

Radio mode

38

Important safety notes

G
WARNING
Handling discs while driving may distract you
from traffic conditions. You could also lose
control of the vehicle. There is a risk of an
accident.
Handle discs only when the vehicle is station-
ary.
G
WARNING
If you handle or operate mobile audio/video
sources when driving, you will be distracted
from the traffic conditions. You could also
lose control of the vehicle. There is a risk of an
accident.
Only handle or operate these mobile audio/
video sources when the vehicle is stationary.
Only operate mobile audio/video sources
using the communication equipment integra-
ted in the vehicle when traffic conditions per-
mit. If this is not the case, park the vehicle
paying attention to traffic conditions and
operate the equipment when the vehicle is
stationary.
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
Observe the legal requirements of the coun-
try in which you are currently driving.
Radio mode
Selecting the radio
Press the $ button.
X
You will hear the last station selected.
Selecting a station
Station search
Press the E or F button briefly.
X
You will hear the next receivable station.
Setting stations manually
Press and hold the E or F button
X
until the desired frequency is reached.
You will hear the selected station if it is
receivable.
Setting the frequency manually
Press the l button.
X
Using the x to s number keys, enter
X
the desired frequency :.
or
Press the : button repeatedly until the
X
menu bar is selected.
Select Radio.
X
The display shows the Radio menu.
Enter Frequency.
Select
X
Using the x to s number keys, enter
X
the desired frequency :.
You can only enter frequencies in the
i
waveband that has been set ( page 40).
Y