Mercedes-Benz COMAND Operating Instructions Manual page 126

Telephony via the Bluetooth
124
mobile phone (see the manufacturer's
operating instructions).
The battery of the mobile phone should
always be kept sufficiently charged in order
to prevent malfunctions.
Preparing for telephony via the Bluetooth
interface:
Hands-Free Profile
R
The mobile phone must support Hands-
Free Profile 1.0 or above.
®
R Bluetooth visibility
®
Bluetooth must be activated on the
mobile phone and must be made visible to
other devices (see the manufacturer's
operating instructions).
This visibility is for restricted periods of
time on some mobile phones.
®
R Bluetooth device name
Every Bluetooth
®
Bluetooth device name. This device name
is freely definable, but can be identical for
all devices from the same manufacturer. It
is therefore recommended that you change
this name so that you can easily recognize
your mobile phone (see the manufacturer's
operating instructions).
i
Not all mobile phones available on the
market are equally suitable. You can obtain
more detailed information about suitable
mobile phones and about the connection
between the mobile phone and COMAND
on the Internet at
http://www.mbusa-mobile.com.
Or call:
the Mercedes-Benz Customer
R
Assistance Center on
1-800-FOR-MERCedes
(1-800-367-6372) (for the USA)
the Customer Relations Center on
R
1-800-387-0100 (for Canada)
i
Some displays (e.g. the signal strength)
depend on the supported version of the
Hands-Free Profile.
®
device has its own
®
interface
Connecting a mobile phone
General information
Before using your mobile phone with
COMAND for the first time, you will need to
search ( page 124) for the phone and then
Y
®
authorize it (log in) (
Device-specific information on authorizing
and connecting Bluetooth
phones can be found on the Internet at
http://www.mercedes-benz.com/
connect.
When you authorize a new mobile phone, it is
connected automatically.
You can authorize up to 15 mobile phones.
Only one mobile phone can be connected to
COMAND at any one time.
If the mobile phone supports the PBAP
(Phone Book Access Profile) and MAP
(Message Access Profile) profiles, the
following information will be displayed on
COMAND when you connect:
phone book
R
call lists
R
the messages (text and e-mail)
R
Further information on the conditions for
connecting (
Y
Searching for a mobile phone
Press the % button.
X
To switch to the menu bar in the telephone
X
basic menu: slide VÆ the controller.
To select Connect Connect Device
X
controller and press to confirm.
page 125).
Y
®
-capable mobile
page 123).
Device: turn the