Using The Telephone - Mercedes-Benz COMAND Operating Instructions Manual

i
You can also accept a call as described
above when another main function is
switched on in COMAND. Once you have
accepted the call, the display switches to
the telephone display. After the call is
finished, you see the display of the previous
main application again.
The display does not switch to telephone
mode if you:
accept the call via the Voice Control
R
System (see the separate operating
instructions).
accept the call using the 6 button on
R
the multifunction steering wheel
Rejecting a call
Press the ~ button on COMAND or on
X
the multifunction steering wheel.
Making a call
Using the number keypad
Call up the telephone basic menu
X
( page 129).
Y
Enter the digits using the number keypad.
X
i
As soon as one of the numbers is touched,
the corresponding button is highlighted in
the display.
To connect the call: press the 6
X
button on COMAND or on the multifunction
steering wheel.
Using the telephone basic menu
Call up the telephone basic menu
X
( page 129).
Y
To select all numbers one after the other:
X
turn and press the controller each time.
Dialing a number:
Press the 6 button on COMAND or on
X
the multifunction steering wheel.

Using the telephone

Redial
Call up the telephone basic menu
X
( page 129).
Y
To select ° from the character list: turn
X
the controller and press to confirm.
or
If the telephone basic menu is displayed,
X
press the 6 button on COMAND.
The list of dialed numbers appears. The
most recently dialed number is at the top.
To select a call: turn the controller.
X
To make a call: press the controller.
X
Using the call list or COMAND phone
book
Open a call list and select an entry
X
( page 138).
Y
or
Call up the COMAND phone book and
X
select an entry ( page 135).
Y
To make a call: press the controller or the
X
6 button.
Making a call via speed dial
You can save entries from the phone book in
the speed dial list and call them using speed
dial numbers ( page 141).
Y
Option 1:
Hold down one of the number keys for
X
longer than two seconds.
The telephone basic menu displays the
selected entry. This initiates dialing.
Option 2:
To select a digit from the digit bar in the
X
basic telephone menu: turn the controller.
Press the controller for longer than two
X
seconds.
The telephone basic menu displays the
selected entry. This initiates dialing.
131
Z