Mercedes-Benz COMAND Operating Instructions Manual page 28

SPLITVIEW
26
The multifunction steering wheel can only
R
be used for functions which relate to the
driver's side.
The driver can lock/unlock the other
R
screens (override feature) (
Switching SPLITVIEW on/off
From the driver's side
SPLITVIEW switched on
:
To switch SPLITVIEW on/off
;
Activating
Press the Ø button.
X
The Vehicle menu appears.
Slide V¬ the controller.
X
The menu bar is shown.
To select ù
X
controller.
SPLITVIEW symbol : appears. The ù
display changes to
The front passenger sees the display of the
function last activated. If the switch-on
time was longer than 30 minutes
previously, the display from the driver's
side is shown.
Deactivating
To select ù
X
and press the controller.
The ù display changes to
ù is hidden in the status bar.
page 63).
Y
On: turn and press the On
Off Off ;.
Off Off in the menu bar: turn
On. On
Locking/unlocking SPLITVIEW:
Proceed as described under "Locking/
X
unlocking the rear-compartment displays"
( page 63). Instead of selecting a rear-
Y
compartment display, select
From the front-passenger side
Activating
To select the SPLITVIEW display using the
X
COMAND remote control (
turn thumbwheel : until the SPLITVIEW
icon appears in the window.
Press the u button on the COMAND
X
remote control.
Deactivating
Press the u button on the COMAND
X
remote control again.
The ù display changes to
The SPLITVIEW symbol is hidden in the
status bar.
The menu called up on the driver's side is
shown.
If COMAND is switched off by removing the
key from the ignition lock while SPLITVIEW is
activated and then switched on again within
30 minutes, SPLITVIEW is activated with the
last settings.
SplitView. SplitView
page 241):
Y
On. On