Cover Assembly/Base Assembly - Toshiba QOSMIO G40 Maintenance Manual

4 Replacement Procedures

4.11 Cover assembly/Base assembly

4.11 Cover assembly/Base assembly
Removing the Cover assembly/Base assembly
The following describes the procedure for removing the cover assembly/base assembly (See
Figure 4-21 to 4-25).
1. Slide the LCD connector cover as shown in the figure below to remove while
pushing down the hook.
Hook
LCD connector cover
Figure 4-21 Removing the LCD connector cover
4-32 [CONFIDENTIAL] QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals