Toshiba QOSMIO G40 Maintenance Manual page 324

4 Replacement Procedures
3. Peel off the AV11 button from the cover assembly.
4. Disconnect the AV11 button cable from the AV11 button.
Installing the AV11 button
The following describes the procedure for installing the AV11 button (See Figure 4-61 and 4-
62).
1. Connect the AV11 button cable to a new AV11 button.
2. Stick a new AV11 button to the cover assembly in place.
NOTE: Do not reuse the removed AV11 button. Be sure to use a new AV11 button.
3. Install the AV11 button holder while sliding it to the opposite direction in the Figure
4-61.
4. Stick the insulator in place.
4-86
Downloaded from LpManual.com Manuals
AV11 button
Figure 4-62 Removing the AV11 button
[CONFIDENTIAL]
AV11 button cable
QOSMIO G40 Maintenance Manual (960-632)
4.33 AV11 button